AMCC 9550SX-8LP Manuale Utente Scaricare il pdf (Pagina 13)

Installing a Serial ATA RAID Controller

www.3ware.com 9

Installing a Serial ATA RAID Controller

Note: The illustrations in this section show a

9550SX-8LP. If you have a different model of controller,

the location of the ports will be slightly different, but the

steps are very similar. For location of the ports on all

boards, see the illustrations on page 6 through page 8.

Note: If you have a Battery Backup Unit (BBU), install

it on the controller before proceeding. For details, see

“Chapter 2. Installing the Battery Backup Unit”.

To connect SATA cables to the controller

Note: If you have a multilane controller, turn to page 13.

1 Take out the SATA cables provided with the 3ware SATA

RAID controller.

One edge of each SATA cable connector is keyed so that it can

only be inserted in one direction. This helps to ensure proper

orientation and installation

2 Decide to which port you want to connect the first cable.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Nessun commento

AMCC 9550SX-8LP Manuale Utente Pagina 13